How to Get the Right Strap Size for your Apple Watch in 4 Steps

Choosing the right watch band for your Apple Watch can be tricky, especially online. Here are four key things to check before placing your order:

1. Find the Case Size of Your Apple Watch

Check the back of your Apple Watch for the case size.

 

2. Select Compatible Straps

Ensure the watch band matches the case size engraved on your Apple Watch. An incorrect size will result in mismatched connectors.

If a wrong size is chosen, the strap will not match your Apple Watch, and the connectors will be either too big or too small for your watch, just like the image below.


 

Please note that Watch Cases and Screen Protectors must be ordered in the exact same size as your Apple Watch.

3. Measure Your Wrist Size

Make sure the strap length fits your wrist. Our watch straps are adjustable, but the shortest and longest lengths vary. Measure your wrist circumference using a soft ruler or a non-elastic cloth.

 

4. Adjusting Watch Strap Length

Most straps are adjustable without tools. If a tool is needed, it will be included with your purchase.The following tutorial covers the adjustment methods of three of our most popular lock types:

Length Adjustment Guide

Removable jewellery clasp

  1. Lift the latch on the top side of the jewellery clasp with your fingers to unsnap it.
  2. Remove extra clasps to shorten the watchstrap length.
  3. To relink the watchstrap, simply close and push the latch hook to snap the clasp shut.

The video tutorial is posted on our Instagram Highlight (@lemonstraps). Please visit Tutorial 2.1 here.

 

These watchstraps are considered jewellery/accessories, and can be worn loosely on your wrist. Perfect fit is not guaranteed.

 

Hook lock

  1. Insert the mini screw driver into the hole where the arrow mark points to. Press the strap firmly onto a table, then push down the screw driver to open the clasp.
  2. Slide the clasp to adjust the length of your watchstrap.
  3. Insert the mini screw driver into the same hole. Push it towards the opposite side to relock the clasp.

 

These watchstraps are infinity adjustable for a perfect fit.

 

Folding clasp

  1. Observe the holes on both sides of the watchstrap. Point the adjustment tool pin into the holes that are deeper and do not have any straight line markings.
  2. Make sure the watchstrap is laid flat on the adjustment tool platform.
  3. Rotate the tool’s knob to push the needle inside the strap out.
  4. Remove excess pieces as needed.
  5. Relink the watchstrap by putting back the needle and pushing it in from the side it came out of with the adjustment tool.
    (*In case the adjustment tool pin is broken because of excessive force, please replace it with the back-up one attached at the back of the tool.)

The video tutorial is posted on our Instagram Highlight (@lemonstraps). Please visit Tutorial 2.2 here.

 

These watchstraps come with small link pieces for comfortable fit.

 

  • 100% Satisfaction Guarantee

    LEMON STRAPS offers "30-day Return or Exchange" and "12-month Product Warranty" to all product purchased.

    Learn more >